Physico-Mechanical Properties of Waste Low-Density Polyethylene Reinforced with Jutefibre Mat Composite for Automobile Application
DOI:
https://doi.org/0.33003/chemclass-2026-1001/11Keywords:
Physico-mechanical properties, Waste low-density polyethylene, Composites Jute-fibre mat, Compression moldingAbstract
The objective of the study was to determine the physico – mechanical properties of jute – fibre mat reinforced waste low density polyethylene. The composites were fabricated using waste low density polyethylene collected from dump sites and plain-woven jute - fibre mat. The formation of composites was carried out using compression molding technique and characterised to determine the mechanical and physical properties of the composites prepared. Findings showed that the composite had an optimum tensile strength of 23.36 MPa (26 % fibre loading), tensile modulus of 1.80 GPa (26% fibre loading), Flexural strength of 22.12 MPa (26 % filler loading), Flexural modulus of 0.4 GPa (26 % fibre loading), Impact strength of 37.96 kJ/m2 (26 % fibre loading), Density of 0.998 g/cm3 (34 % fibre loading) and water absorption of 4.2 % (34 % fibre loading).Downloads
Download data is not yet available.
References
R
Additional Files
Published
2026-08-06
Data Availability Statement
NoneIssue
Section
Original Research Articles
License
Copyright (c) 2026 The Authors

This work is licensed under a Creative Commons Attribution 4.0 International License.
All the work in this journal are licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Physico-Mechanical Properties of Waste Low-Density Polyethylene Reinforced with Jutefibre Mat Composite for Automobile Application. (2026). ChemClass Journal, 10(1), 141-150. https://doi.org/0.33003/chemclass-2026-1001/11
