Optimization of High Surface Area Magnetic Biochar Production from Coconut (Cocos nucifera L.) Shell with FeCl3 using Response Surface Methodology

Authors

  • Chima Maximus Ejimadu Author
    • James Majebi Okuo Author
      • Felix Ebhodaghe Okieimen Author

        DOI:

        https://doi.org/10.33003/chemclass-2025-0904/07

        Keywords:

        Biochar; Magnetic biochar; Physicochemical properties; Textural properties; Optimization

        Abstract

        In this study coconut shell biochar obtained by slow pyrolysis at 450°C was subsequently co-pyrolysed with FeCl3 to obtain Fe3+ - doped magnetic biochar. The effects of the co-pyrolysis process variables: heat treatment temperature, duration of heat treatment, metal loads on the specific (BET) surface area of the magnetic biochar produced was optimized using response surface methodology (RSM) with central composite design (CCD). The optimum BET surface area (m2.g-1) of 2106.42 predicted from the model at process condition of metal loading 3.01 wt%, heat treatment temperature 327.88°C and duration of heat treatment of 1.627 hr was about 3-fold higher than the value for the precursor biochar (712.00 m2.g-1). The BET surface area of the magnetic biochar sample prepared using the optimum process conditions predicted by the model (2098.04 m2.g-1) was found to be within 2% margin of the value obtained from the model; thus validating the model. The physicochemical properties, surface oxygen functional groups, surface morphology, and EDX surface elemental composition of the magnetic and unmodified biochar samples were determined. Improvement in physical chemical properties, surface morphology and textural properties in this reported for the Fe3+ - doped biochar in the study are relevant to its application as sorbent for organic and inorganic contaminants, for environmental remediation, agronomic benefits and as catalyst / catalyst support.

        Downloads

        Download data is not yet available.

        References

        R

        Additional Files

        Published

        2025-12-30

        Data Availability Statement

        None

        Issue

        Section

        Original Research Articles

        How to Cite

        Optimization of High Surface Area Magnetic Biochar Production from Coconut (Cocos nucifera L.) Shell with FeCl3 using Response Surface Methodology. (2025). ChemClass Journal, 9(4), 76-91. https://doi.org/10.33003/chemclass-2025-0904/07

        Share

        Similar Articles

        1-10 of 69

        You may also start an advanced similarity search for this article.