Utilisation of Metal Oxide Nanoparticles in Enhancing the Mechanical Properties of Waste Polypropylene Nanocomposites

Authors

  • Abubakar Sadiq Bello Author
    • James Illemona Idakpo Author
      • oseph Jacob Author
        • Ibrahim Gidado Author
          • Saminu Hamman Barau Author

            DOI:

            https://doi.org/10.33003/chemclass-2025-0904/15

            Keywords:

            polypropylene; waste polypropylene; Barium Oxide BaO; Titanium Oxide TiO2; impact resistance test.

            Abstract

            The increasing amount of polymeric wastes, especially polypropylene (PP), presents serious environmental problems because it is not biodegradable. This work investigated the development of titanium dioxide (TiO₂) and barium oxide (BaO) nanoparticles as reinforcing agents to improve the mechanical properties of waste polypropylene (wPP) nanocomposites. The BaO and TiO₂ nanoparticles were prepared via a controlled co-precipitation technique. Thereafter, these nanoparticles were mixed with waste polypropylene using melt blending to create nanocomposites of varying weight compositions. The final products underwent mechanical testing, which included measurements of elastic modulus, impact resistance, tensile strength, flexural strength, and hardness. These mechanical test results indicated that sample A (96 g wPP + 4 g TiO2) has the highest tensile strength of 11.38 MPa with sample D (88 g wPP + 12 g BaO), 11.20 MPa; compared to 9.38 MPa of the control sample (wPP); sample E (88g wPP + 12 g BaO) has the highest elastic modulus of 0.83 J/mm2 compared to that of the control sample (0.77 J/mm2) and then sample B (92 g wPP + 8 g TiO2) with elastic modulus of 0.76 J/mm2. Other mechanical properties such as hardness value and flexural strength followed the same pattern. These results demonstrated that incorporation of TiO2 and BaO nanoparticles into wPP improved its mechanical properties which was observed to increase with increase in weight percentage of the nanoparticles incorporated. The results also indicated better interfacial adhesion actions of BaO and TiO₂ within the polymer matrix, accounted for the notable improvements of these parameters. This study therefore depicts another sustainable way of plastic wastes re-utilization.

            Downloads

            Download data is not yet available.

            References

            R

            Additional Files

            Published

            2025-12-30

            Data Availability Statement

            None

            Issue

            Section

            Original Research Articles

            How to Cite

            Utilisation of Metal Oxide Nanoparticles in Enhancing the Mechanical Properties of Waste Polypropylene Nanocomposites. (2025). ChemClass Journal, 9(4), 214-230. https://doi.org/10.33003/chemclass-2025-0904/15

            Share

            Similar Articles

            31-40 of 69

            You may also start an advanced similarity search for this article.