Physico – Mechanical Properties and Dynamic Mechanical Analysis of Glass Mat Reinforced Unsaturated Polyester Composite for Car Bumper Application

Authors

  • Elijah Danladi Author
    • Paul Bila Author
      • Aliyu Bulama Dagaji Author
        • Abdulkadir Suleiman Abdulrahman Author

          DOI:

          https://doi.org/10.33003/chemclass-2025-0904/24

          Keywords:

          DMA, Glass mat, Mechanical properties, Physical properties, Unsaturated polyester.

          Abstract

          The aim of the present work was to determine the physical, mechanical and dynamic mechanical properties of glass mat reinforced unsaturated polyester for car bumper application. The composites were fabricated using hand lay – up method. The physical, mechanical and dynamic mechanical properties were investigated. The results showed that there was significant increase in tensile and flexural properties (tensile strength of 129.73 MPa, tensile modulus of 1979.01 MPa; flexural strength of 134.28 MPa, flexural modulus of 7.59 GPa at 27% fibre loading) and relatively good impact strength of 12.427kJ/m2 at 27% fibre loading. The DMA results also show good interfacial interaction with 27% fibre loading having storage modulus of 350 MPa at 35 oC, loss modulus of 32.5 MPa at 35 oC and damping factor of 0.30 at 92.5 oC. The density and water absorption did not change significantly; these made it a good material for car bumper application. The findings showed that reinforcing unsaturated polyester with glass mat significantly improved the properties of interest in the present work

          Downloads

          Download data is not yet available.

          References

          R

          Additional Files

          Published

          2025-12-30

          Data Availability Statement

          None

          Issue

          Section

          Original Research Articles

          How to Cite

          Physico – Mechanical Properties and Dynamic Mechanical Analysis of Glass Mat Reinforced Unsaturated Polyester Composite for Car Bumper Application. (2025). ChemClass Journal, 9(4), 320-329. https://doi.org/10.33003/chemclass-2025-0904/24

          Share

          Most read articles by the same author(s)

          Similar Articles

          11-20 of 82

          You may also start an advanced similarity search for this article.