Copper-based metal-organic framework (Cu-BDC MOF) for removal of pharmaceutical pollutants from aqueous solutions
DOI:
https://doi.org/10.67867/ccj.2026v10i3.03Keywords:
Metal-organic Framework; Cu-BDC MOF; Pharmaceutical pollutants; Adsorption; Wastewater remediationAbstract
The discharge of pharmaceutical emerging contaminants into aquatic environments poses serious ecological and public health risks, including antimicrobial resistance. In this study, a copper-based metal-organic framework (Cu-BDC MOF) was synthesized solvothermally using terephthalic acid (benzene-1,4-dicarboxylate, BDC) as the organic linker and evaluated as an adsorbent for the simultaneous removal of promethazine hydrochloride (PMZ), mebendazole (MBZ), and paracetamol (PCM) from aqueous solution. The material was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Batch adsorption experiments were used to investigate the effects of initial concentration, contact time, pH, adsorbent dosage, temperature, and agitation speed. Under optimized conditions (initial concentration of 100 mg/L per pharmaceutical, adsorbent dosage of 0.5 g, contact time of 60 min, pH 7.0, temperature 30 °C, and agitation speed of 2000 rpm), the Cu-BDC MOF exhibited high adsorption efficiency, achieving approximately 99% removal of PMZ and MBZ and more than 93% removal of PCM within 30 min. Equilibrium data fitted the Langmuir model well, with maximum adsorption capacities of 48.54 mg/g for PMZ, 111.11 mg/g for MBZ, and 28.17 mg/g for PCM. Kinetic analysis showed that the pseudo-second-order model best described the adsorption process, indicating chemisorption as the dominant mechanism. Thermodynamic results confirmed that adsorption was spontaneous and endothermic. The material retained more than 85% removal efficiency after three regeneration cycles (using ethanol washing at 80 °C), demonstrating good reusability for the simultaneous removal of multiple pharmaceutical pollutants. These findings suggest that Cu-BDC MOF is a promising recyclable adsorbent for pharmaceutical wastewater remediation.Downloads
References
[1]. Sutherland, C. (2025). Exploring the state-of-the-art in metal-organic frameworks for antibiotic adsorption: A review of performance, mechanisms, and regeneration. Environmental Toxicology and Chemistry, 44(4), 880–894. https://doi.org/10.1093/etetc/vgae001
[2]. Zheng, M., Shao, Y., Ma, F., Li, W., & Guo, M. (2025). Adsorption of antibiotics in medical wastewater by MOF-based hydrogel composites: A comprehensive review. Journal of Environmental Chemical Engineering, 13(2), 101340. https://doi.org/10.1016/j.jece.2025.101340
[3]. Yuan, Y., Li, S., & Zhu, L. (2024). The use of bimetallic metal-organic frameworks as restoration materials for pollutants removal from water environment. Royal Society Open Science, 11(7), 240380. https://doi.org/10.1098/rsos.240380
[4]. Bathula, S., Thottathil, S., & Puttaiahgowda, Y. M. (2024). MOFs and MOF-based composites for the adsorptive removal of ciprofloxacin. Macromolecular Materials and Engineering, 309(6), 2400238. https://doi.org/10.1002/mame.202400238
[5]. Mu, Q., Li, X., Li, R., & Ji, Y. (2025). Laccase-mimicking active inorganic organic hybrid covalent organic framework filtration membrane for rapid removal of drug pollutants. Chemical Engineering Journal, 512, 161234. https://doi.org/10.1016/j.cej.2025.161234
[6]. Li, W., Guo, M., & Zheng, M. (2024). Co/Cd-MOF-derived porous carbon materials for moxifloxacin adsorption from aqueous solutions. Molecules, 29(16), 3873. https://doi.org/10.3390/molecules29163873
[7]. Boudjema, L., Dahiya, A. K., da Silva, I., Zouchoune, F., & Al-Muhtaseb, A. H. (2025). Synthesis optimization, adsorption properties and spectroscopic investigation of an NH₂-tagged Cu-based MOF with open metal sites. Materials Advances, 6, 6076–6093. https://doi.org/10.1039/D5MA00123A
[8]. Zhang, Y., Pan, X., Wu, Y., Huang, Z., Pan, Z., Wei, Y., & Yin, X. (2025). High capacity and efficient adsorption of lutetium (III) by the metal-organic framework HKUST-1 in simulated medical wastewater. Annals of the New York Academy of Sciences. Advance online publication. https://doi.org/10.1111/nyas.15234
[9]. Shih, Y.-J., Wu, Z.-L., Chen, W.-H., Liu, Y.-H., & Huang, C.-P. (2025). Highly sensitive analysis of binary pharmaceuticals in water samples on graphene oxide-confined Cu-MOF composite. Chemical Engineering Journal, 512, 161234. https://doi.org/10.1016/j.cej.2025.161234
[10]. Weber, W. J., & Morris, J. C. (1963). Kinetics of adsorption on carbon from solutions. Journal of the Sanitary Engineering Division, American Society of Civil Engineers, 89(2), 31–60. https://doi.org/10.1061/JSEDAI.0000430
[11]. Kubokawa, Y. (1960). An interpretation of the Elovich equation for the rate of chemisorption on the basis of surface heterogeneity. Bulletin of the Chemical Society of Japan, 33(6), 734–738. https://doi.org/10.1246/bcsj.33.734
[12]. Roginsky, S. Z., & Zeldovich, Y. B. (1934). The catalytic oxidation of carbon monoxide on manganese dioxide. Acta Physicochimica URSS, 1, 554–594.
[13]. Aharoni, C., Sideman, S., & Hoffer, E. (1979). Adsorption of phosphate ions by collodion-coated alumina. Journal of Chemical Technology and Biotechnology, 29(8), 494–502. https://doi.org/10.1002/jctb.503290806
[14]. Bangham, D. H., & Burt, F. P. (1924). The behaviour of gases in contact with glass surfaces. Proceedings of the Royal Society of London A, 105(732), 481–488. https://doi.org/10.1098/rspa.1924.0035
[15]. Lagergren, S. (1898). Zur theorie der sogenannten adsorption gelöster stoffe [About the theory of so-called adsorption of soluble substances]. Kungliga Svenska Vetenskapsakademiens Handlingar, 24(4), 1–39.
[16]. Ho, Y. S., & McKay, G. (1999). Pseudo-second order model for sorption processes. Process Biochemistry, 34(5), 451–465. https://doi.org/10.1016/S0032-9592(98)00112-5
[17]. Wu, F. C., Tseng, R. L., & Juang, R. S. (2009). Initial behavior of intraparticle diffusion model used in the description of adsorption kinetics. Chemical Engineering Journal, 153(1-3), 1–8. https://doi.org/10.1016/j.cej.2009.04.042
[18]. Largitte, L., & Pasquier, R. (2016). A review of the kinetics adsorption models and their application to the adsorption of lead by an activated carbon. Chemical Engineering Research and Design, 109, 495–504. https://doi.org/10.1016/j.cherd.2016.02.006
[19]. Kumar, K. V., Porkodi, K., & Rocha, F. (2009). Comparison of various error functions in predicting the optimum isotherm by linear and non-linear methods for the sorption of basic red 9 onto activated carbon. Journal of Hazardous Materials, 170(2-3), 876–882. https://doi.org/10.1016/j.jhazmat.2009.05.059
[20]. Qiu, H., Lv, L., Pan, B. C., Zhang, Q. J., Zhang, W. M., & Zhang, Q. X. (2009). Critical review in adsorption kinetic models. Journal of Zhejiang University Science A, 10(5), 716–724. https://doi.org/10.1631/jzus.A0820524
[21]. Wang, J., & Guo, X. (2020). Adsorption kinetic models: Physical meanings, applications, and solving methods. Journal of Hazardous Materials, 390, 122156. https://doi.org/10.1016/j.jhazmat.2020.122156
[22]. Simonin, J. P. (2016). On the comparison of pseudo-first-order and pseudo-second-order rate laws in the modeling of adsorption kinetics. Chemical Engineering Journal, 300, 254–263. https://doi.org/10.1016/j.cej.2016.04.079
[23]. Plazinski, W., Rudzinski, W., & Plazinska, A. (2009). Theoretical models of sorption kinetics including a surface reaction mechanism: A review. Advances in Colloid and Interface Science, 152(1-2), 2–13. https://doi.org/10.1016/j.cis.2009.07.009
[24]. Ho, Y. S. (2006). Review of second-order models for adsorption systems. Journal of Hazardous Materials, 136(3), 681–689. https://doi.org/10.1016/j.jhazmat.2005.12.043
[25]. Vaghetti, J. C. P., Lima, E. C., Royer, B., da Cunha, B. M., Cardoso, N. F., Brasil, J. L., & Dias, S. L. P. (2009). Pecan nutshell as biosorbent to remove Cu(II), Mn(II) and Pb(II) from aqueous solutions. Journal of Hazardous Materials, 162(1), 270–280. https://doi.org/10.1016/j.jhazmat.2008.05.039
[26]. Zhang, Y., Zhu, C., Liu, F., Yuan, Y., Wu, H., & Li, A. (2018). Effects of ionic strength on the adsorption of pharmaceuticals on activated carbon. Chemosphere, 193, 1010–1018. https://doi.org/10.1016/j.chemosphere.2017.11.114
[27]. McLintock, I. S. (1967). The Elovich equation in chemisorption kinetics. Nature, 216(5121), 1204–1205. https://doi.org/10.1038/2161204a0
[28]. Allen, S. J., McKay, G., & Porter, J. F. (2003). Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems. Journal of Colloid and Interface Science, 280(2), 322–333. https://doi.org/10.1016/j.jcis.2004.08.078
[29]. Srivastava, V. C., Mall, I. D., & Mishra, I. M. (2006). Characterization of mesoporous rice husk ash (RHA) and adsorption kinetics of metal ions from aqueous solution onto RHA. Journal of Hazardous Materials, 134(1-3), 257–267. https://doi.org/10.1016/j.jhazmat.2005.11.052
[30]. Genna, D. T., Pfund, L. Y., Samblanet, D. C., & Teat, S. J. (2016). Removal of pharmaceuticals from water via π–π stacking interactions in perfluorinated metal-organic frameworks. Crystal Growth & Design, 16(9), 4904–4910. https://doi.org/10.1021/acs.cgd.6b00488.
[31]. Wu, Y.-J., & Wang, C.-Y. (2019). Insight into the catalytic effects of open metal sites in metal–organic frameworks on hydride dehydrogenation via nanoconfinement. ACS Sustainable Chemistry & Engineering, 7(20), 17213–17223. https://doi.org/10.1021/acssuschemeng.9b02606
Additional Files
Published
Data Availability Statement
All relevant data are available within the manuscriptIssue
Section
License
Copyright (c) 2026 The authors

This work is licensed under a Creative Commons Attribution 4.0 International License.
All the work in this journal are licensed under a Creative Commons Attribution 4.0 International License.
